home | careers | sitemap | contact us  
   
 
 
   
  ANS - Adaptive Network Solutions    
 
http://www.an-solutions.de

A.N. Solutions is the first design house to bring together the crucial components that ensure the wireless project's success and allow ultimate flexibility for a client. These components are the easy-to-use RF modules, development tools, software, and design services. A.N. Solutions helps OEMs and system integrators take their new products from concept to market on time and on budget with no in-house RF expertise. Ultra-sensitive IEEE802.15.4/ZigBee RF modules, embedded software and development tools for Sub-1-GHz and 2.4GHz license-free ISM bands enable quick and efficient solutions for energy management, building automation, and other application areas requiring intelligent wireless connectivity.


ANY 2400 MODULE

2.4 GHz Amplified Modules for IEEE 802.15.4/ZigBee® Wireless Mesh Networking Applications

The @ANY2400 is an amplified IEEE 802.15.4/ZigBee RF module featuring internal chip antennas. Its unique RF design achieves a rare combination of the industry-leading range performance and low power consumption. The @ANY 2400 module's small footprint of less than a square inch of space makes the integration easy, while the built-in chip antennas enables rapid design-in with no RF knowledge required.

More Info
ANY 2400 USB DONGLE

USB Dongle, based on 2.4 GHz @ANY module for IEEE 802.15.4/ZigBee® for Wireless Mesh Networking Applications


The @ANY2400 Dongle is a handy USB extension that enables an easy access to mobile & portable devices. The @ANY2400 Dongle provides reliable USB connectivity and is widely used for monitoring & control of wireless network systems. Based on @ANY module, the @ANY2400 Dongle makes integration a breeze, while the built-in chip antenna enables rapid design-in, requiring no RF knowledge and benefiting from the standard USB interface. Depending on firmware used the @ANY2400 Dongle allows access to module's AT-Command line interface via virtual COM port. Provided JTAG interface allows in-circuit programming as well as debugging.

More Info
ANY 2400 BRICK

2.4 GHz Amplified Modules for IEEE 802.15.4/ZigBee® Wireless Mesh Networking Applications

The Brick Development Board is a self-contained sensor node containing @ANY 2400 modules and possessing their RF characteristics. There is a different BRICK board available for each @ANY RF module model. The board features JTAG connector for easy on-board programming, status LED's, reset and programmable buttons, allowing to program individual functions. The BRICK board also has integrated temperature sensor for reference purposes. The board is powered by two AA batteries or mains power supply.

This versatile development board gives developers an utmost flexibility all the way to the final stages of design. BRICK's easy configuration allows running different network topologies in order to determine which suits application demands the best. It also allows seamless upgrades at a later stage. Further enhancing the flexibility during evaluation & development phases, all connections of @ANY modules are fully functional and could be easily utilized. These vital functions allow a maximum flexibility for a developer.

More Info

ANY-900-1 and ANY-900-2
868/915 MHz Modules for IEEE 802.15.4/ZigBee® Wireless Mesh Networking Applications


The @ANY900-1 and @ANY900-2 are the ultra-low power 802.15.4/ZigBee RF modules for Sub-1 GHz ISM band. The tiny modules feature an exceptional sensitivity of -110 dBm that results in the line-of-sight range of up to 500 m* (@ANY900-1). Featuring the built-in chip antenna, @ANY900-1 module presents a fully integrated solution for the system integrators and OEMs. @ANY900-2 module's U.FL antenna connector enables rapid design-in, using a different external antenna for every application and thus providing greater flexibility for the developers. Both modules eliminate the need for costly and time-consuming RF development, and shorten time to market for a wide range of standards based wireless products.

• US and European Sub-1 GHz ISM band
• Outdoor range: up to 500 m* (@ANY900-1)
• Battery lifetime: up to 10 Years ( Tx/Rx every 5 minutes with 2500 mAh battery )
• Data rate: up to 1 Mbit/s
• Scalable network topology: Point-to-Point, Star, Tree, Mesh
• Serial AT-commands for easy prototyping and quick setup
• Fully matched built-in ceramic chip antenna
• 256kByte data storage by additionally build-in flash memory
• U.FL connector (@ANY900-2) - Flexible external antenna options

More Info
ANY 900 USB DONGLE
USB Dongle, based on 868/915 MHz @ANY module for IEEE 802.15.4/ZigBee® for Wireless Mesh Networking Applications


The @ANY900 Dongle is a handy USB extension that enables an easy access to mobile & portable devices. A variety of USB Dongles is available, based on different @ANY RF module models. The @ANY900 Dongle provides reliable USB connectivity and is widely used for monitoring & control of wireless network systems. Based on @ANY module, the @ANY900 Dongle makes integration a breeze, while the built-in chip antenna enables rapid design-in, requiring no RF knowledge and benefiting from the standard USB interface. Depending on firmware used the @ANY900 Dongle allows access to module's AT-Command line interface via virtual COM port. Provided JTAG interface allows in-circuit programming as well as debugging.

More Info
ANY-900-1-Brick and ANY-900-2-Brick
868/915 MHz Modules for IEEE 802.15.4/ZigBee® Wireless Mesh Networking Applications
Versatile ZigBee Development Board with Sensors


There are two BRICK Development Board models. One is based on @ANY900-1 RF module, and the other is on @ANY900-2. Each board contains JTAG connector for on-board programming, status LED's for indicating different function stages, switches for reset and individual programming, as well as integrated temperature sensor. The BRICK development board provides ultimate flexibility throughout the evaluation & development process, up to the final product design phase. The board can be powered by batteries or mains power.

More Info

ANY DESIGN Sub-1 GHz/IEEE802.15.4 Development Kits
ANY 900-1 Development Kit for design, prototyping and deployment of wireless IEEE802.15.4/ZigBee solutions




The ANY 900 DESIGN Development Kit is a comprehensive toolset enabling easy design, prototyping and deployment of wireless IEEE802.15.4/ZigBee solutions, using Adaptive Network Solutions' @ANY product platform. The development kit provides the developers with everything they need to create market-ready wireless systems and applications, while mastering the intricacies of WSN technology. The kit features support of third party applications, convenient reference drivers, as well as APIs for UART, I2C, ADC, and 1-wire peripherals. @ANY DESIGN kit supports the intuitive development environment from Atmel, including embedded debugging feature using Atmel JTAG in-circuit debugger. The JTAG programming interfaces facilitate design of custom applications.

Development Kit's Features & Benefits:
• Fully programmable USB dongles and @ANY BRICK boards
• Smart MAC Suite (SMS) Base featured applications
• Easy implementation of various sensors over @ANY BRICK boards
• Full support of 3rd party embedded software applications, such as Atmels BitCloud® stack and associated ANSI C API programmability, as well as 6LoWPAN solutions support
• Full support of 3rd party applications such as wireless sensor networking demo application, range measurement, etc.
• Convenient reference drivers and APIs for UART, I2C, ADC, and 1-wire peripherals
• Intuitive development environment from Atmel, including embedded debugging feature with Atmel JTAG in-circuit debugger

More Info

A.N. Solutions applies the same modular approach in software, as it does in hardware. Various embedded software components are designed to interoperate seamlessly and can be easily mixed-and-matched depending on the exact needs of a client.

@ANY Smart MAC Suite
@ANY SMS Base
@ANY SMS Pro


Mesh networking topologies supporting dynamic routing schemes based on IEEE 802.15.4 that are compliant to ZigBee™ Pro, 6LoWPAN, as well as Wireless HART, can be implemented and customized on customer demand.

More Info